External IO port interrupt, the initial setting is the rising edge trigger interrupt, but when the io port level is kept at 1.2V, the interrupt will not be triggered all the time. Have you encountered this problem?
James ポストする March 17, 2021
There is no clear interrupt flag.
Emma ポストする March 17, 2021
Turn off the interrupt after triggering, and turn on the interrupt after the processing is completed. .
Joseph ポストする March 17, 2021
1. You'd better refer to the history to check whether the program setting is correct and whether it is set to level trigger
2. Unless afterwards, the signs should be cleaned up in time,
Aden ポストする February 1, 2024
I want to know the same thing
